Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Genesis >> 2022 >> G70 2.0T, AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Trunk Module >> Power Trunk Module Drive Unit >> Repair Procedures >> Installation

Repair Procedures: Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Tighten the power trunk control unit mounting bolts.
  2. Connect the power trunk motor connector.
  3. Install the push rod in the hinge ball joint.

    Tightening torque:  21.6 - 26.5 N.m (2.2 - 2.7 kgf.m, 15.9 - 19. 5 lb-ft)

  4. Connect the power trunk control unit connectors.
  5. Install the luggage side trim [LH].
  6. Check that the power trunk operates normally after connecting the negative (-) battery terminal.
    NOTE:
    • Make sure that the connectors are plugged in properly.
    • Check that the power trunk operates normally.
    • When changing the trunk module and drive unit, always perform the parameter saving process.
    • Always check for normal operation when a power trunk module related part is changed.
    • When abnormal system operation is found, check the DTC Code and the connection of the wiring and cable.
scientia non olet · About Brad's Car Manuals