Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Geo >> 1992 >> Metro XFi >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Diagnostic Charts >> Chart A-5, Fuel Injection Circuit Check (No-Start) >> Notes

Chart A-5, Fuel Injection Circuit Check (No-Start): Notes

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches

When fuel injector is energized by ECM, it will activate the fuel injector plunger and pressurized fuel will be injected into throttle body. Fuel pump will operate as long as engine is cranking and ECM is receiving ignition reference pulses.

NOTE: Test numbers refer to test numbers on diagnostic chart.
  1. Checks to see if ECM is controlling fuel injector signals.
  2. This checks fuel injector for correct resistance.
  3. This checks for voltage at fuel injector.
  4. This checks for an open or short to ground in Yellow/Black wire, a faulty ECM or a faulty fuel injector.
  5. This checks for an open or short to ground in Yellow wire, an open in White/Blue wire or a faulty fuel injector resistor.