Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Geo >> 1992 >> Tracker LSi, Automatic >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel >> Testing >> Hazard Warning Switch >> Metro

Hazard Warning Switch: Metro

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Ensure hazard fuse and turn signal relay are good. Push switch to ON position. Using test light, ensure voltage exists at headlight switch harness connector terminal No. 3 (White/Green wire) and terminal No. 9 (Yellow/Red wire). Headlight switch harness connector C-5 has 16 terminals, and is plugged into bottom of junction/fuse block located under left dash panel.
  2. If voltage does not exist at terminal No. 3 (White/Green wire), repair White/Green wiring circuit of junction/fuse block. If voltage does not exist at terminal No. 9 (Yellow/Red wire), replace hazard/headlight switch assembly.