Toe-In Adjustment: Front

1. Adjust front wheel toe-in by changing tie rod length. Loosen rack boot clamps (small end), and slide clamps from boot. Loosen right and left tie rod end lock nuts.
2. Turn right and left tie rods same amount to adjust toe-in to specification. See ALIGNMENT SPECIFICATIONS  table. Tighten tie rod end nuts to specification. See TORQUE SPECIFICATIONS  . Dimension "A" should be the same on left and right tie rods.

See Fig 1 .

Fig 1: Adjusting Front Toe-In (Typical)

Courtesy of GENERAL MOTORS CORP.