Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Geo >> 1994 >> Tracker Base, 1.6 U, Automatic >> Repair and Diagnosis >> Electrical >> Starter >> On-Vehicle Testing >> Ignition Switch Test

Ignition Switch Test

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Using test light, backprobe White/Green wire terminal of ignition switch 7-terminal connector. Connector is located behind lower instrument panel, near steering column. Test light should glow.
  2. If test light does not glow, check fusible link "B". Fusible link box is located on right inner fender. Check for open in White/Green wiring circuit to ignition switch. See WIRING DIAGRAMS  .
  3. Turn ignition switch to START position. Using a test light, backprobe Black/Yellow wire terminal (at ignition switch 7-terminal connector) to starter circuit. Test light should glow. If test light does not glow, replace ignition switch.
scientia non olet · About Brad's Car Manuals