Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Geo >> 1997 >> Metro Base >> Repair and Diagnosis >> Engine Performance >> Engine Controls - Adjustments 1.0 & 1.3L >> Throttle Position (TP) Sensor >> Inspection >> Using Scan Tool

Using Scan Tool

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Insert a .14" (3.5 mm) feeler gauge between throttle stop screw and throttle lever. See Figure. If Idle Speed Control (ISC) motor plunger is contacting throttle lever screw, bring engine to normal operating temperature.
  2. Turn engine OFF. Connect scan tool to DLC and turn ignition ON and engine OFF. Using scan tool, read TP sensor voltage. If voltage is not .98-1.02 volts, adjust or replace TP sensor. See ADJUSTMENT. If voltage is .98-1.02 volts, TP sensor is adjusted properly.
scientia non olet · About Brad's Car Manuals