Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Honda >> 1989 >> Civic Si >> Repair and Diagnosis >> Engine Performance >> System >> Basic Testing >> Ignition Checks >> Electronic Ignition System >> Ignition Coil Resistance

Ignition Coil Resistance

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Remove distributor cap. Remove 2 Phillips screws retaining primary ignition leads to ignition coil. Remove primary leads from ignition coil. Using an ohmmeter, check resistance between primary terminals "A" and "B" on ignition coil. See Fig 1 . Resistance should be .3-.5 ohms at room temperature.
  2. Check secondary resistance between terminal "A" and secondary output terminal (coil tower). Resistance should be 9440-14,160 ohms at room temperature. Replace coil if readings were not within specification.
    Fig 1: Ignition Coil Terminal Identification
    G117893Courtesy of AMERICAN HONDA MOTOR CO., INC.