Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Honda >> 2000 >> Odyssey EX >> Repair and Diagnosis >> Brakes >> Anti-Lock/Traction Control >> Wheel Sensor Inspection

Wheel Sensor Inspection

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Inspect the front and rear pulsers for chipped or damaged teeth.
  2. Measure the air gap between the wheel sensor and pulser all the way around while rotating the pulser. Remove the rear brake disc to measure the gap on the rear wheel sensor. If the gap exceeds 1.0 mm (0.04 in.), check for a bent suspension arm.

    Standard: 

    1. Front: 0.5-1.0 mm (0.02-0.04 in.)
    2. Rear: 0.2-1.1 mm (0.01-0.04 in.)
    Fig 1: Measuring Air Gap Between Wheel Sensor & Pulser All The Way Around While Rotating Pulser (Front)
    G01519899Courtesy of AMERICAN HONDA MOTOR CO., INC.
    Fig 2: Measuring Air Gap Between Wheel Sensor & Pulser All The Way Around While Rotating Pulser (Rear)
    G01519900Courtesy of AMERICAN HONDA MOTOR CO., INC.