Set/Resume/Cancel Switch

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Cruise Control Set/Resume/Cancel Switch Test/Replacement

1. Remove the driver's airbag.

2. Remove the cover (A), then remove the set/resume/ cancel switch (B).

3. Check for continuity between the terminals in each switch position according to the table.
- If there is continuity, and it matches the table, but switch failure occurred on the cruise control actuator input test, check and repair the wire harness on the switch circuit.
- If there is no continuity in one or both positions, replace the switch.