Wiper Control Module: Testing and Inspection

Download the full database via torrent (~1.1 TB)

Windshield Wiper Intermittent Control Circuit Input Test

1. Remove the gauge assembly.

2. Inspect the all connectors and socket terminals to be sure they are all making good contact.
- If the terminals are bent, loose, or corroded, repair them as necessary, and recheck the system.
- If the terminals look OK, go to step 3.

3. Make these input tests at the connector.
- If any test indicates a problem, find and correct the cause, then recheck the system.
- If all the input tests prove OK, the gauge assembly must be faulty; replace it.