Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Honda >> 2007 >> Fit Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> PGM-FI System >> ECT Sensor 2 Replacement

ECT Sensor 2 Replacement

Download the full database via torrent (~1.1 TB)
  1. Drain the engine coolant (see COOLANT CHECK ).
  2. Remove the splash shield.
  3. Disconnect the ECT sensor 2 connector (A).
    Fig 1: ECT Sensor 2 Connector With Torque Specification
    G05454651Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove ECT sensor 2 (B).
  5. Install the parts in the reverse order of removal with a new O-ring (C), then refill the radiator with engine coolant (see COOLANT REPLACEMENT ).
scientia non olet · About Brad's Car Manuals