Electric Load Sensor: Service and Repair

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

ELD Replacement

USA models

1. Make sure you have the anti-theft code for the audio unit, then write down the audio presets.
2. Remove the battery.
3. Remove the under-hood fuse/relay box.

4. Remove the under-hood fuse/relay box lower cover (A) from the fuse/relay box.

5. Remove the No. 3 IG (50 A) fuse (A) and the No. 1 BATTERY (80 A) fuse (B).

6. Disconnect the ELD 3P connector (A), then remove the ELD (B).
7. Install the parts in the reverse order of removal.
8. Reinstall the battery.
9. Enter the anti-theft code for the audio unit, then enter the audio presets.
10. Set the clock.