Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Honda >> 2011 >> Pilot EX, 3.5 4 >> Repair and Diagnosis >> Engine Performance >> System >> Intake Air System >> Air Cleaner Removal/Installation

Air Cleaner Removal/Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Disconnect the MAF sensor/IAT sensor connector (A).
    Fig 1: MAF Sensor/IAT Sensor Connector, Harness Clamp, Bolts, Band & Air Cleaner With Torque Specifications
    G05961471Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the harness clamps (B) and the bolts (C).
  3. Loosen the band (D), then remove the air cleaner (E).
  4. Install the parts in the reverse order of removal.
    NOTE: When tightening the screw of the hose band (F), align the edge of the hose band (G) within the range of the marks (H) painted on the hose band.
scientia non olet · About Brad's Car Manuals