Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Honda >> 2012 >> CR-Z Base, Standard Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> VSA System Components >> VSA Modulator-Control Unit Removal and Installation >> Removal

VSA Modulator-Control Unit Removal and Installation: Removal

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Turn the ignition switch to LOCK (0).
  2. Disconnect the 10 mm brake lines (A) and the 12 mm brake lines (B) from the VSA modulator-control unit (C).
    Fig 1: Identifying Brake Lines And VSA Modulator-Control Unit
    G06953275Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the VSA modulator-control unit 32P connector (A) by pushing the lock (B) and pulling down the lever (C); the connector disconnects itself.
    Fig 2: Disconnecting VSA Modulator-Control Unit 32P Connector
    G06953276Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the VSA modulator-control unit (A) with the bracket (B) from the body.
    Fig 3: Identifying VSA Modulator-Control Unit, Bracket And Wire Harness Clip
    G06953277Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Remove the wire harness clip (C) from the bracket.
  6. Remove the VSA modulator-control unit (A) from the bracket (B).
    Fig 4: Identifying VSA Modulator-Control Unit And Bracket
    G06953278Courtesy of AMERICAN HONDA MOTOR CO., INC.