Accelerator Pedal Position Sensor: Service and Repair

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Accelerator Pedal Module Removal/Installation

1. Remove the driver's dashboard lower cover Driver's Dashboard Lower Cover Removal / Installation.

2. Disconnect the APP sensor 6P connector (A).

3. Remove the accelerator pedal module (B).

NOTE:

- The APP sensor is not available separately. Do not disassemble the accelerator pedal module.
- If the accelerator pedal module is dropped, replace it.

4. Install the parts in the reverse order of removal.