Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Honda >> 2012 >> Pilot 2WD V6-3.5L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Variable Valve Timing Actuator Position Sensor >> Service and Repair

Variable Valve Timing Actuator Position Sensor: Service and Repair

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches



Rocker Arm Oil Pressure Sensor Replacement

1. Remove the rocker arm oil pressure sensor cover.






2. Disconnect the rocker arm oil pressure sensor connector (A), then remove the rocker arm oil pressure sensor (B).





3. Apply liquid gasket (P/N 08717-0004, 08718-0003, 08718-0004, or 08718-0009) to the rocker arm oil pressure sensor threads. Install the component within 5 minutes of applying the liquid gasket.

NOTE:

- Using too much liquid gasket may cause liquid gasket to enter the oil passage or the end of the rocker arm oil pressure sensor.
- If too much time has passed after applying the liquid gasket, remove the old liquid gasket and residue, then reapply the new liquid gasket.

4. Install the rocker arm oil pressure sensor with a new O-ring (C).

5. Connect the rocker arm oil pressure sensor connector.

6. Install the rocker arm oil pressure sensor cover.