Spark Plug: Service and Repair

Download the full database via torrent (~1.1 TB)

Ignition Coil and Spark Plug Removal/Installation

1. Remove the engine cover.

2. Disconnect the ignition coil connectors (A), then remove the ignition coils (B).

FRONT

REAR

3. Remove the spark plugs and inspect them Testing and Inspection.

4. Apply a small amount of anti-seize compound to the plug threads, and screw the plugs into the cylinder head, finger tight, then tighten the plugs to the specified torque.

5. Install the ignition coils in the reverse order of removal.