Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Removal & Installation >> Computerized Engine Controls >> Powertrain Control Module >> Installation

Powertrain Control Module: Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Install PCM to PCM mounting bracket ensuring that the mounting tabs are engaged. Secure the spring latch to PCM. Connect harness connectors to PCM. Tighten PCM harness connector bolts to specification. See TORQUE SPECIFICATIONS .
  2. Install PCM cover to PCM mounting bracket, ensuring mounting tabs on PCM mounting bracket are engaged into mounting holes in PCM cover. Reconnect negative battery cable. If NEW PCM has been installed, PCM MUST be programmed. See PROGRAMMING .
scientia non olet · About Brad's Car Manuals