Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> Engine Performance >> System >> Testing Wiring Systems For Intermittent & Poor Connections >> Testing for Continuity >> With a Test Lamp

With a Test Lamp

Download the full database via torrent (~1.1 TB)
  1. Remove the power feed (i.e. fuse, control module) from the suspect circuit.
  2. Disconnect the load.
  3. Connect 1 lead of the test lamp to 1 end of the circuit to be tested.
  4. Connect the other lead of the test lamp to battery positive voltage.
  5. Connect the other end of the circuit to ground.
  6. If the test lamp illuminates (full intensity), then the circuit has good continuity.
scientia non olet · About Brad's Car Manuals