Auto Leveling Control Module Removal/Installation

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the glove compartment. (See GLOVE COMPARTMENT REMOVAL/INSTALLATION .)
Disconnect the auto leveling control module connector.
Remove the screw, then remove the auto leveling control module.
Install in the reverse order of removal.

Fig 1: Removing/Installing Auto Leveling Control Module
Courtesy of MAZDA MOTORS CORP.