Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Hummer >> 2005 >> H2 4D Utility Pickup >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Computer/Integrating Systems >> Repair Instructions >> Body Control Module Replacement >> Installation Procedure

Installation Procedure

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
    Fig 1: Body Control Module
    GM832814Courtesy of GENERAL MOTORS CORP.
  1. Install the BCM (1) into the bracket.
  2. Install the I/P carrier. Refer to Instrument Panel (I/P) Carrier Replacement in Instrument Panel, Gages, and Console.
  3. Connect the battery negative cables. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.
  4. Setup the BCM customized options. Refer to Body Control Module (BCM) Programming/RPO Configuration .
scientia non olet · About Brad's Car Manuals