Accelerator Pedal Position Sensor: Service and Repair

Download the full database via torrent (~1.1 TB)

Accelerator Pedal Position Sensor Replacement

Removal Procedure

1. Remove the knee bolster bracket.
2. Disconnect the accelerator pedal position (APP) sensor electrical connector.

3. Remove the accelerator pedal/APP sensor nuts.
4. Remove the accelerator pedal/APP sensor from the vehicle.

Installation Procedure

1. Install the accelerator pedal/APP sensor over the studs.

Notice: Refer to Fastener Notice.

2. Install the accelerator pedal/APP sensor nuts.

Tighten the nuts to 9 N.m (80 lb in).

3. Connect the APP sensor electrical connector.
4. Inspect below the pedal for binding, to ensure full range of motion.
5. Install the knee bolster bracket.