EBCM Replacement
WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
If the electronic brake control module (EBCM) is replaced, the following procedures must be performed:
- EBCM Reprogramming-Refer to Service Programming System (SPS) .
- Recalibrate the brake pedal position (BPP) sensor (Without JL7). Refer to Brake Pedal Position Sensor Replacement .
- Steering Angle Sensor (SAS) calibration. Refer to Steering Angle Sensor Centering .