Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Hyundai >> 1991 >> Scoupe LS, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks >> Distributor >> Ignition Coil Resistance

Ignition Coil Resistance

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Remove primary and secondary leads from ignition coil. Using an ohmmeter, check primary resistance between positive and negative terminals of coil. Resistance should be .72-.88 ohm.
  2. Check secondary resistance between ignition coil positive terminal and high voltage terminal. Resistance should be 10,900-13,300 ohms. Replace coil if readings are not within specifications.
scientia non olet · About Brad's Car Manuals