Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Hyundai >> 2005 >> XG350 Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System >> MFI Control System >> Electric Throttle System >> Sensor Checking (Idle Switch) >> Using Voltmeter

Using Voltmeter

Download the full database via torrent (~1.1 TB)
  1. Disconnect the APS connector.
  2. Check the continuity between terminal 4 and sensor ground.
    Fig 1: Idle Switch Voltage/Continuity Table
    G00721343Courtesy of HYUNDAI MOTOR CO.
  3. If out of specification, replace the throttle position sensor.
    Fig 2: Checking Idle Switch Continuity
    G00721344Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About Brad's Car Manuals