Keyless Entry Transmitter: Testing and Inspection

TRANSMITTER CODE REGISTRATION




1. Connect the DLC cable of hi-scan to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on hi-scan.




2. Select the vehicle model and then do "CODE SAVING"




3. After selecting "CODE SAVING" menu, button "ENTER" key, then the screen will be shown as above.




4. After removing the ignition key from key cylinder, push "ENTER" key to proceed to the next mode for code saving.




5. After press lock or unlock button, choose saving 2nd key or not.




6. If you choose [YES). screen will be shown as "above"




7. After press lock or unlock button, code saving is completed.