Repair Procedures: Replacement: Notes

Download the full database via torrent (~1.1 TB)

NOTE: In the case of the vehicle equipped with immobilizer or button engine start system, perform "Key Teaching" procedure together (Refer to BUTTON ENGINE START SYSTEM ).

Turn ignition switch OFF and disconnect the negative (-) battery cable.
Disconnect the TCM Connector (A).

Fig 1: Identifying TCM Connector
Courtesy of HYUNDAI MOTOR CO.
Remove the air cleaner assembly (A) (Refer to INTAKE MANIFOLD ).

Fig 2: Identifying Air Cleaner Assembly
Courtesy of HYUNDAI MOTOR CO.
After removing the installation bolts, remove the TCM (A) from the air cleaner.
TCM bracket installation bolt:

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Fig 3: Identifying TCM
Courtesy of HYUNDAI MOTOR CO.
Installation is reverse of removal.