Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Hyundai >> 2011 >> Elantra GLS, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Control System >> Specifications >> Repair Procedures >> Inspection

Repair Procedures: Inspection

Download the full database via torrent (~1.1 TB)
  1. Check signal waveform of Input & output speed sensor using the GDS.

    Specification:  Refer to "SIGNAL WAVEFORM " section.



  1. Turn ignition switch OFF.
  2. Disconnect the oil temperature sensor connector.
  3. Measure resistance between sensor signal terminal and sensor ground terminal.
  4. Check that the resistance is within the specification.
scientia non olet · About Brad's Car Manuals