Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Hyundai >> 2011 >> Equus Signature >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System Components >> Engine Control Module (ECM) >> Repair Procedures >> Removal

Repair Procedures: Removal

Download the full database via torrent (~1.1 TB)
NOTE: In the case of the vehicle equipped with immobilizer, perform "Key Teaching" procedure together (Refer to TEACHING MODE PROCEDURE DESCRIPTION (STEP BY STEP) ).
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the cover on the ECM.
  3. Disconnect the ECM connector (A) and the TCM connector (B).
  4. Remove the ECM & TCM bracket installation bolts (C) and nut (D).
    Fig 1: Identifying ECM Connector, TCM Connector, ECM And TCM Bracket Installation Bolts And Nut
    G07311491Courtesy of HYUNDAI MOTOR CO.
  5. After removing the installation bolts (A), remove the ECM (B) from the bracket.
    Fig 2: Identifying Installation Bolts, ECM And Bracket
    G07311492Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About Brad's Car Manuals