Memory Positioning Module: Service and Repair

Download the full database via torrent (~1.1 TB)

Removal

1. Remove the negative (-) battery terminal.
2. Remove the driver seat in the car.
3. Remove the IMS module (A) after loosening 3 screws in the bottom of seat.

4. Disconnect the IMS module connector (A) and then remove the IMS module (B).

Installation

1. Install the IMS module after reconnecting the connector.
2. Install the driver seat.

NOTE:
- Make sure the IMS module connectors and related connectors are plugged in properly.
- Check that IMS system operates normally.