Fuel Filter: Service and Repair

Removal

1. Remove the fuel pump.
2. Disconnect the electric pump wiring connector (A) and the fuel sender connector (B).




3. Remove the cushion pipe fixing clip (A), and then separate the head assembly (B) from reservoir cup.




4. Remove the return nozzle (B) after releasing the fixing hook (A).




5. Remove the reservoir-cup (B) after releasing the fixing hooks (A).




6. Remove the pre-filter (C) after releasing the fixing hooks (A,B).





CAUTION:
Be careful of O-ring.

7. Separate the electric pump motor (A) and regulator (B) from the fuel filter (C).




8. Disconnect the connector (A), and then remove the head assembly (B).










Installation

1. Installation is reserve of removal.