Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Hyundai >> 2012 >> Tucson GL, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Purge Control Solenoid Valve (PCSV) >> Repair Procedures >> Removal

Repair Procedures: Removal

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the purge control solenoid valve connector (A).
  3. Disconnect the vapor hoses (B) from the purge control solenoid valve.
  4. Remove the bracket installation bolt (C), and then remove the valve from the surge tank.
    Fig 1: Identifying Purge Control Solenoid Valve Connector, Vapor Hoses And Bracket Installation Bolt
    G06872238Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About Brad's Car Manuals