Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Hyundai >> 2013 >> Elantra GLS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Crankshaft Position Sensor (CKPS) >> Repair procedures >> Removal

Repair procedures: Removal

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the crankshaft position sensor connector (A) and remove the sensor after removing the installation bolt.
    Fig 1: Crankshaft Position Sensor Connector
    G10234875Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Brad's Car Manuals