Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Hyundai >> 2014 >> Elantra GT Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Knock Sensor (KS) >> Repair procedures >> Removal

Repair procedures: Removal

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the knock sensor connector (A).
    Fig 1: Identifying Knock Sensor Connector
    G09885913Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the intake manifold.

    (Refer to "INTAKE MANIFOLD ")

  4. Remove the installation bolt (A), and then remove the sensor from the cylinder block.
    Fig 2: Identifying Knock Sensor Connector Bolt
    G09885914Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Brad's Car Manuals