Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Hyundai >> 2016 >> Santa Fe XL Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Camshaft Position Sensor - CMPS >> Repair procedures >> Removal >> Notes

Repair procedures: Removal: Notes

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
WARNING:
  • DON'T remove the camshaft position sensor while the engine is running or right after engine is turned off. The part and engine oil is hot and can cause burns.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the installation bolt (B), and then vertically remove the sensor from the cylinder head.
scientia non olet · About Brad's Car Manuals