Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Hyundai >> 2016 >> Veloster Base, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.6L GDI >> Crankshaft Position Sensor (CKPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Turn the Ignition Switch OFF and disconnect the Battery Negative (-) Cable.
  2. Disconnect the Crankshaft Position Sensor Connector (A) and remove the Sensor (B) after removing the Installation Bolt.
    Fig 1: Crankshaft Position Sensor Connector And Installation Bolt
    G10607933Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Brad's Car Manuals