Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Hyundai >> 2017 >> Santa Fe XL Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> CVVT Oil Control Valve (OCV) >> Repair Procedures >> Removal >> CVVT Oil Control Valve (Intake)

CVVT Oil Control Valve (Intake)

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the intake manifold.

    (Refer to "INTAKE MANIFOLD ")

  3. Disconnect the CVVT oil control valve connector (A).
  4. Remove the installation bolt (B), and then remove the valve from the engine.

    Bank 1 

    Fig 1: Locating CVVT Oil Control Valve Connector And Installation Bolt (Bank 1)
    G12034068Courtesy of HYUNDAI MOTOR AMERICA

    Bank 2 

    Fig 2: Locating CVVT Oil Control Valve Connector And Installation Bolt (Bank 2)
    G12034069Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Brad's Car Manuals