Repair Procedures: Installation

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

CAUTION:

Install the component with the specified torques.
Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.

Apply the engine oil to the O-ring.
Insert the sensor in the installation hole and be careful not to damage.

Installation is reverse of removal.
Crankshaft position sensor installation bolt:

9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb-ft)