Electronic Key Check

With CONSULT-II

• Check Electronic Key switch "LOCK / UNLOCK BUTTON", "TRUNK BTN-COM" and "PANIC BTN" in "DATA MONITOR" mode with CONSULT-II.

With out CONSULT-II

• Check electronic key switch in "SWITCH MONITOR" mode. Refer to "SWITCH MONITOR  ".

OK or NG? 

1. OK >> Electronic key is OK.
2. NG >> GO TO 2.

With CONSULT-II

• Check electronic key "ID Code" in "WORK SUPPORT" mode with CONSULT-II. Refer to "PROCEDURE 2 (WITH CONSULT-II)  ".

With out CONSULT-II

• Check electronic key "ID Code" in "REMOTE CONTROLLER ID SET UP" mode. Refer to "PROCEDURE 1 (WITHOUT CONSULT-II)  ".

OK or NG? 

1. OK >> Electronic key not registered.
2. NG >>
   • Check multi remote control receiver. Refer to "MULTI-REMOTE CONTROL RECEIVER CHECK  ".
   • Check electronic key. Refer to "REMOTE CONTROLLER BATTERY CHECK  ".