Fail- Safe Mode
When any manual and automatic operations are not performed, if any motor operations of seats or tilt of steering are detected for T1 or more, status is judged "Output malfunction". Motor operation will be suspended automatically, and all automatic operations will be ineffective (in this case, the motor will not operate manually).
FAIL- SAFE MODE
| OPERATED PORTION | T1 |
|---|---|
| Seat sliding | Approx. 0.1 sec. |
| Seat reclining | Same as above |
| Seat lifting (Front) | Same as above |
| Seat lifting (Rear) | Same as above |
| steering tilt | Same as above |
| steering telescopic | Same as above |