Data Monitor (SPEC) Mode
For DATA MONITOR (SPEC) mode descriptions, see DATA MONITOR (SPEC) MODE DESCRIPTIONS table.
DATA MONITOR (SPEC) MODE DESCRIPTIONS
| Monitored Item | Description |
|---|---|
| ENG SPEED [rpm] | Indicates engine speed computed from crankshaft position sensor (POS) signal. |
| MAS A/F SE-B1 [V] | The signal voltage of the mass airflow sensor specification is displayed. When engine is running, specification range is indicated. |
| B/FUEL SCHDL [msec] | "Base fuel schedule" indicates the fuel injection pulse width programmed into ECM, prior to any learned on board correction. When engine is running, specification range is indicated. |
| A/F ALPHA-B1 Or B2 [%] | The mean value of the air-fuel ratio feedback correction factor per cycle is indicated. When engine is running, specification range is indicated. This data also includes the data for the air-fuel ratio learning control. |