Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Infiniti >> 2004 >> M45 >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> DTC P0452: EVAP Control System Pressure Sensor >> Diagnostic Procedure >> 3. Check EVAP Control System Pressure Sensor Power Supply Circuit

3. Check EVAP Control System Pressure Sensor Power Supply Circuit

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Turn ignition switch ON.
  2. Check voltage between EVAP control system pressure sensor terminal 1 and ground with CONSULT-II or tester.
    Fig 1: Checking Voltage Between EVAP Control System Pressure Sensor Terminal 1 & Ground
    G00796082Courtesy of NISSAN MOTOR CO., U.S.A.

    Voltage: Approximately 5V 

OK or NG 

  1. OK: GO TO 5. CHECK EVAP CONTROL SYSTEM PRESSURE SENSOR GROUND CIRCUIT FOR OPEN AND SHORT .
  2. NG: GO TO 4.