Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Infiniti >> 2004 >> M45 >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> DTC P0507: ISC System >> DTC Confirmation Procedure >> With CONSULT-II

With CONSULT-II

Download the full database via torrent (~1.1 TB)
  1. Open engine hood.
  2. Start engine and warm it up to normal operating temperature.
  3. Turn ignition switch OFF and wait at least 10 seconds.
  4. Turn ignition switch ON again and select "DATA MONITOR" mode with CONSULT-II.
    Fig 1: Scan Tool Display - Data Monitor
    G00796155Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Start engine and run it for at least 1 minute at idle speed.
  6. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE .
scientia non olet · About Brad's Car Manuals