Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Infiniti >> 2006 >> FX45 >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> Shift Control System >> Control Device Removal and Installation >> Removal

Control Device Removal and Installation: Removal

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Disconnect lower lever of control device and control rod.
  2. Remove knob cover (1) below selector lever downward.
  3. Pull lock pin (2) out of selector lever knob (3).
  4. Remove selector lever knob (3).
  5. Remove A/T console finisher. Refer to "COMPONENT PARTS DRAWING ".
  6. Remove center console. Refer to "COMPONENT PARTS DRAWING ".
  7. Remove rear ventilator duct 2. Refer to "REMOVAL AND INSTALLATION ".
    Fig 1: Identifying Selector Lever Knob
    G04075623Courtesy of NISSAN MOTOR CO., U.S.A.
  8. Remove key interlock cable (1) from control device. Refer to "REMOVAL AND INSTALLATION ".
  9. Disconnect A/T device harness connector (2).
  10. Remove control device assembly.
    Fig 2: Identifying A/T Device Harness Connector
    G04075624Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Brad's Car Manuals