Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Infiniti >> 2006 >> G35 x >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Introduction (Sedan) >> Basic Service Procedure >> Exhaust Valve Timing Control Learning (M/T Models) >> Operation Procedure >> With CONSULT-II

With CONSULT-II

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Start engine and warm it up to normal operation temperature.
  2. Set shift lever in neutral position and confirm that following electrical or mechanical loads are not applied.
    • Headlamp switch is OFF
    • Air conditioner switch is OFF
    • Rear defogger switch is OFF
    • Steering wheel is in the straight-ahead position, etc.
  3. Keep the engine speed between 1, 800 and 2, 000 RPM.
  4. Select "EXH V/T CONTROL LEARN" in "WORK SUPPORT" mode with CONSULT-II.
    Fig 1: CONSULT-II Screen Display - EXH V/T CONTROL LEARN In WORK SUPPORT Mode
    G04119560Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Touch "START" and wait 20 seconds.
  6. Make sure that "CMPLT" is displayed on CONSULT-II screen.

    Learning completed : CMPLT 

    Learning not yet : YET 

    Fig 2: CONSULT-II Screen Display - CMPLT In WORK SUPPORT Mode
    G04119561Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Brad's Car Manuals