Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Infiniti >> 2009 >> QX56 AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component Testing >> On-Vehicle Repair >> Intake Valve Timing Control >> Camshaft Position Sensor (PHASE) >> Removal

Camshaft Position Sensor (PHASE): Removal

Download the full database via torrent (~1.1 TB)
  1. Remove engine room cover using power tool. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove air duct and resonator assembly. Refer to "REMOVAL AND INSTALLATION ".
  3. Disconnect camshaft position sensor connector.
  4. Remove camshaft position sensor (2) from Intake valve timing control solenoid valve cover (LH) (1).
    Fig 1: Identifying Camshaft Position Sensor And Intake Valve Timing Control Solenoid Valve Cover (LH)
    G06315985Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Brad's Car Manuals