Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Introduction (2 Of 2) >> Fuel Pump >> Component Inspection

Component Inspection

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. CHECK FUEL PUMP
    1. Turn ignition switch OFF.
    2. Disconnect "fuel level sensor unit and fuel pump" harness connector.
    3. Check resistance between "fuel level sensor unit and fuel pump" terminals as follows.
      TERMINAL RESISTANCE REFERENCE CHART

      Terminals Resistance (Ω)
      1 and 3 0.2 - 5.0 [at 25°C (77°F)]

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace "fuel level sensor unit and fuel pump"