Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Infiniti >> 2010 >> M35 Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - System And Component Testing >> Ignition Signal >> Component Inspection (Condenser)

Component Inspection (Condenser)

Download the full database via torrent (~1.1 TB)
  1. CHECK CONDENSER
    1. Turn ignition switch OFF.
    2. Disconnect condenser harness connector.
    3. Check resistance between condenser terminals as per the following.
      TERMINAL RESISTANCE CHART

      Terminals Resistance
      1 and 2 Above 1 MΩ [at 25°C (77°F)]

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace condenser.

      Fig 1: Checking Resistance Between Condenser Terminals 1 And 2
      G04875488Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Brad's Car Manuals