Component Function Check

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

CHECK INTAKE AIR TEMPERATURE (IAT) SENSOR

Turn ignition switch OFF.
Disconnect mass air flow sensor (bank 1) harness connector.

Check resistance between mass air flow sensor (bank 1) terminals as follows:

Terminals	Condition		Resistance (kΩ)
1 and 2	Temperature [°C (°F)]	25 (77)	1.800 - 2.200

Is the inspection result normal?

YES: GO TO 2.

NO: Proceed to "DIAGNOSIS PROCEDURE ".

CHECK INTERMITTENT INCIDENT
Perform "INTERMITTENT INCIDENT ".

Is the inspection result normal?

YES: INSPECTION END

NO: Proceed to "DIAGNOSIS PROCEDURE ".