Component Function Check

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

WARNING: This page is about a different car, the 2011 Nissan 370Z. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUNCTION

Select "PUSH SW" in "Data Monitor" mode with CONSULT-III.

Check the push-button ignition switch signal under the following conditions.

TEST ITEM CONDITION

Test item	Condition	Status
PUSH SW	Push-button ignition switch is pressed	ON
PUSH SW	Push-button ignition switch is not pressed	OFF

Is the indication normal?

YES: INSPECTION END.

NO: Go to "DIAGNOSIS PROCEDURE ".